Silvia Club of NSW

Hi all,

I bought these a little while back but plans have changed so i won't be using them and a bit more cash is always a bonus.

Old school mesh weds, a bit rough. Clear stock s car rear brakes, will probably clear s13 stock fronts (assuming you have a 5 stud conversion) but s14/15 will require spacers.

Looking for $650






cheers

Dave

_________________
meh

aye my old rims!
dave, they are +17 all round
there should be a sticker on there unless it fell of.

i know that it definately needs a 25mm spacer to clear r32/r33gtst,s14/15 brakes so that brings the offset to -8

it will clear stock GTS/T rear brakes too

this is how it sits on a r32 gtst with the 25mm spacer

Thanks for the pics but they can't be 17 all round. The front has the same dish as the rears and there is only about 5mm difference in the height at the hub.

The rears have the +18 sticker, the fronts would be +18 -25.4 (1 inch) +about 5mm for the difference at the hub which brings it back to around +1 or so.

Doesn't matter really.

What did you do to fit the front on your r32 anyway?

_________________
meh

i flared the fronts 25mm and it still needed another 15mm or so - this was with a 215/45 tyre as well.

hmm i do recall there being a sticker on the front when i got it from upgarage and it did say 18 same as the rear.

oh well, gl with the sale mate

fark if i still had my sw20 id get these!!! Try selling to teh MR2 guys.

_________________
Just Blaze!

Would you seperate the rears?

or is there any member who would like to chip in for the front pair?

sold

_________________
meh