Mine is putting out 146kw @ the wheels. So its not too bad eh? Getting Haltech ecu and GT30 soon
. I'll be happy with 180plus at the wheels.
| Silvia Club of NSW https://silviansw.com/forum/ |
|
| How much should a 180 put out at the wheels? https://silviansw.com/forum/viewtopic.php?f=4&t=9650 |
Page 1 of 1 |
| Author: | Sneeza [ Mon Jun 21, 2004 12:38 pm ] |
| Post subject: | How much should a 180 put out at the wheels? |
Lets say 93 model 180sx (Sr20) with stage 1 mods (FMIC, 3inch zorst from turbo back, pod) and running @ 1 bar. Whats a decent figure for kw @ the wheels? |
|
| Author: | TT [ Mon Jun 21, 2004 12:42 pm ] |
| Post subject: | |
160ish rwkw |
|
| Author: | GaryD [ Mon Jun 21, 2004 3:33 pm ] |
| Post subject: | |
140-150 |
|
| Author: | Sneeza [ Mon Jun 21, 2004 5:42 pm ] |
| Post subject: | |
Mine is putting out 146kw @ the wheels. So its not too bad eh? Getting Haltech ecu and GT30 soon . I'll be happy with 180plus at the wheels.
|
|
| Author: | TT [ Tue Jun 22, 2004 9:06 am ] |
| Post subject: | |
a guy I work with had a 94 180sx. 3 inch turbo back exhaust from liverpool exhausts with twin tip muffler some cheap pod filter turbo xs bleed valve set to 12 psi. this pulled 141rwkw. |
|
| Author: | CONAN [ Tue Jun 22, 2004 4:59 pm ] |
| Post subject: | |
would a s15 with the same mods pull more power?? [fmic, pod, turbo back exhaust, 1 bar] ... |
|
| Author: | Sneeza [ Tue Jun 22, 2004 6:07 pm ] |
| Post subject: | |
They would put out alot more. Mate of mine had a stock s15 until he got a fmic, zorst, pod and bov. He was putting out 161kw @ the wheels. |
|
| Author: | dik180 [ Wed Jun 23, 2004 10:09 pm ] |
| Post subject: | |
not sure wat mine puts out but i held my mates skyline even and he had 170 rwkw so i was pretty happy with that all ive got is fmic cat back and pod |
|
| Author: | BT [ Thu Jun 24, 2004 2:23 pm ] |
| Post subject: | |
At the last dyno night i pulled 136.6rwkw . All i have is a pod,3inch dump/front pipe and cat into a 2 1/2 inch exhaust.It's pretty nasty with a big bend in it. I also have a 600hp fuel pump,heavy duty clutch,BOV,etc.But these things aren't really power producing. I'm hoping to unleash a few extra kw when i get a proper Jap 3inch catback. 
So that's a pretty stock power figure. |
|
| Author: | Slippy [ Tue Jun 29, 2004 4:20 pm ] |
| Post subject: | |
Mine pulled 152rwkw Mods are ; Apexi N1 duel from cat back Turbo XS bleed valve ( 14/16psi) FMIC Pod filter |
|
| Author: | Sneeza [ Tue Jun 29, 2004 11:26 pm ] |
| Post subject: | |
Slippy, what model 180 do you have? Is it a black top? |
|
| Author: | saru [ Thu Jul 01, 2004 9:13 pm ] |
| Post subject: | |
Hey I have 94 180sx 3" exhaust, pod, xs bleed valve, trust FMIC , running 1 bar and got 164.7kw at wheels |
|
| Author: | defect [ Mon Jul 19, 2004 6:19 am ] |
| Post subject: | |
i have 3" from cat k&n pod bleed valve making 144rwkw on 12pounds. |
|
| Author: | Sneeza [ Tue Aug 31, 2004 2:32 pm ] |
| Post subject: | |
Mine pulled out 153kw @ the wheels at a recent dyno run. Still aiming for 200+ kw @ the wheels 
|
|
| Author: | Nebuchernezzer [ Tue Aug 31, 2004 4:26 pm ] |
| Post subject: | |
If you can borrow a gtech it'll give you a rough idea of rear wheel power, good for after making mods etc i guess. I have SR20, 3" turbo back, extractor manifold and at the time it had a stock VL commo airbox with a dirty filter. Gtech told me i had 155rwkw@14/16psi (good ol spiking boost...) |
|
| Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|