| Silvia Club of NSW https://silviansw.com/forum/ |
|
| Painted!!! https://silviansw.com/forum/viewtopic.php?f=4&t=6740 |
Page 1 of 2 |
| Author: | Gamer [ Mon Jan 26, 2004 9:41 pm ] |
| Post subject: | Painted!!! |
For those who have seen my car in the past, I know you have become used to the look of paches of primer as a perfect artwork on my car, I must apologise, but times have changed and we all know it had to be dome one day!!! So... this is the reson I have not been able to attend the past couple of meets!!! so here is the product of patience!!!! 
|
|
| Author: | sik_180 [ Mon Jan 26, 2004 9:44 pm ] |
| Post subject: | |
Very Nice! Who did the work for you??? and if you don't mind how much? thanks Adam |
|
| Author: | Silver_Streak [ Mon Jan 26, 2004 9:47 pm ] |
| Post subject: | |
Yeh! Ditto! Very nice job! Black and gold look good together! Enjoy the ride! Cheers! 
|
|
| Author: | Gamer [ Mon Jan 26, 2004 10:12 pm ] |
| Post subject: | |
Every thing was done with friends and close associates, I did a lot of the rubbing back (due to lack of knowlage in all other areas of prepwork), but it couldnt have been done for the price it was with out a hell of a lot of help. It was between 1200 and 1500 bucks, due to odds and ends that have to be purchased. I am just bloody happy the thing is painted!!!!! |
|
| Author: | Redline [ Mon Jan 26, 2004 10:25 pm ] |
| Post subject: | |
very nice, wouldnt want a kit on that driveway! mine is the same =\ |
|
| Author: | ZEi250t [ Mon Jan 26, 2004 10:55 pm ] |
| Post subject: | |
very nice work! she looks great! |
|
| Author: | Rudager [ Mon Jan 26, 2004 11:39 pm ] |
| Post subject: | |
Redline wrote: very nice, wouldnt want a kit on that driveway!
mine is the same =\ I've got a nice flat driveway, but the gutter along the road is one of those dodgy curved ones that dont get flattened out a bit for driveways which means if i take it at any more that 1km/h then the standard bar with the car at standard height smacks into the ground, lucky it's a factory nismo bar which is plastic if it was fiberglass it could get messy EDIT: oh and sweet colour
|
|
| Author: | Lawsy [ Tue Jan 27, 2004 7:33 am ] |
| Post subject: | |
Nice work dude! Good original colour without being over the top. |
|
| Author: | MFX_R33 [ Tue Jan 27, 2004 9:46 am ] |
| Post subject: | |
Quote: very nice, wouldnt want a kit on that driveway!
mine is the same =\ That is my driveway, and I got my skyline in and out. The trick is just take it slow, and on a big angle 
Jeff. P.S. The gaurds look good
|
|
| Author: | plaYboY [ Tue Jan 27, 2004 9:48 am ] |
| Post subject: | ~ |
nice gills mate |
|
| Author: | MFX_R33 [ Tue Jan 27, 2004 10:12 am ] |
| Post subject: | |
Those are our new "MFX 35mm flared gaurds". 
If there is some interest, we could do a group buy for guy's on here. Jeff. |
|
| Author: | plaYboY [ Tue Jan 27, 2004 11:01 am ] |
| Post subject: | |
did yer get thos from japanese motorsports? |
|
| Author: | Gamer [ Tue Jan 27, 2004 1:52 pm ] |
| Post subject: | |
The gaurds are actually a brand new set from MFX, I was lucky enough to observe their creation from start to finish, MFX_R33 is the guy to ask about them. They were created using the stock gaurds as a start point so they wont interfear with aftermarket bars and they work really well with the lines of the car!!! If I am not mistaken, they will be working on a front bar in the near future too. Purdy sexy if I do say so myself 
for more info: http://www.mfx.com.au |
|
| Author: | MFX_R33 [ Tue Jan 27, 2004 5:30 pm ] |
| Post subject: | |
If you have a look at the JMS ones you will see that they are a totally original unit. These are also a bit wider than there's I believe (35mm as opposed to 20mm). Our ones will also be substantially cheaper. Jeff. |
|
| Author: | cypher1024 [ Tue Jan 27, 2004 8:35 pm ] |
| Post subject: | |
And when you say cheaper, approximately how much are we talking? |
|
| Page 1 of 2 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|