Silvia Club of NSW

Hello !

I have been having alot of trouble with my old CA18DET engine, so now im converting to an SR20DET..

Here are the specs :

Displacement: 1998cc (2.0 liter)
Cam type: DOHC 16 valve, chain driven cam sprockets
Bore and stroke: 86mm x 86mm
Compression: 8.5 : 1
Horsepower: 205hp at 6000rpm
Torque: 203 ft/lbs at 4000rpm
Stock boost: 7 psi
Throttle body bore: 60mm
Injector size:370cc/min
Turbo specs:
Compressor: T-25, 60 trim 56mm BCI-1 compressor.
Turbine: T-25, 62 trim 53.8mm 0.64 A/R turbine housing.
Center Section: Journal bearings


I was just wondering, what is the easyest way to tune this engine and the cheapest (for now) and what kind of hp am i looking at?

Thanks
Kjetil Riisnes

If you are swapping in a stock engine just use the stock SR20 ECU if you can get it with the engine.