Silvia Club of NSW

hey peeps my s13 has been a little off lately and i finally got around to checking the fault codes on ecutalk

the error cas fault shows up heaps

now the issue i have is that the car bogs down and then comes fine

it happens randomly and through the whole rev range ... i notice as well if you move the cas loom where it meets the tps loom the car stalls

im thinking a wiring issue but i dont really want to swap the entire loom is there any place i can buy the connectors for the CAS so i can remake that loom my self

car is sr20det

any advice would be great

_________________

Cruise & Event Photos: http://hilariousmotorsport.com
DJ FOR HIRE . NRG HOUSE RNB , 18S 21ST ANY OCCASION

first thing, try tightening the pins on the loom so it holds a bit tighter against the CAS. Ive seen that first hand many times. Just get a pin/small screwdriver and pull the pins across.

thanks ark ill try that , the plugs pretty much had it though lol

_________________

Cruise & Event Photos: http://hilariousmotorsport.com
DJ FOR HIRE . NRG HOUSE RNB , 18S 21ST ANY OCCASION