| Silvia Club of NSW https://silviansw.com/forum/ |
|
| GTR Turbo? https://silviansw.com/forum/viewtopic.php?f=1&t=12623 |
Page 1 of 1 |
| Author: | Aym23q [ Sun Nov 07, 2004 3:49 am ] |
| Post subject: | GTR Turbo? |
Hey guys How much is an R33 GTR ball bearing turbo worth.. 2nd hand but in good nick? cheers |
|
| Author: | ai_04 [ Sun Nov 07, 2004 1:30 pm ] |
| Post subject: | |
are you talking about the t28 off a gtr engine? |
|
| Author: | Nismodified [ Sun Nov 07, 2004 1:39 pm ] |
| Post subject: | |
afaik, GTR turbos are T25's and they are a bit smaller then Sr turbos, (but the GTR uses two T25's of cos) A single GTR turbo should be maxing out at 110-130rwkw, and they should be priced at or around 200-500 (guestimate) Unless your talking about some N1 turbos which should be BB, then i dont have a clue. Maybe it would be better to specify exactly what turbo it is. |
|
| Author: | Aym23q [ Sun Nov 07, 2004 5:53 pm ] |
| Post subject: | |
Its a T28, Ball bearing.. what other info do you need? off a gtr, whats it worth? |
|
| Author: | ai_04 [ Sun Nov 07, 2004 6:36 pm ] |
| Post subject: | |
i'd say its worth around ~500 also. but thing is the t28s off gtrs are smaller than t28's off an s15 (for example) or any other car that runs a t28 stock... so they'd probably be better suited to smaller engines. |
|
| Author: | dkonig [ Sat Nov 13, 2004 5:00 pm ] |
| Post subject: | |
They sell on Ebay for around 500 to people who see T28 and think its a good buy for their S13 etc. They have a tiny exhaust housing 0.48, bigger front wheel than the 25 and 25g as found stock on S13's but because of the tiny exhaust they flow less than either. They dont bolt straight up to SR20, the GTR's have studs on the turbos and holes on the manifold, other way around on SR20, plus you have to rotate the housings. All that work, and then power wise you will go backwards! DK |
|
| Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|